Vörur fyrir stærri verkefni

Cost-effective and reliable heating

With the renewable power of nature and low impact on the environment, a heating system from NIBE supplies your property with heat, cooling, ventilation and hot water. It not only ensures a pleasant indoor climate, but also energy-efficient and worry-free operation – at low costs.

The Grand Hotel in Mölle changed oil to geothermal heat

The Grand Hotel in Mölle was inaugurated in 1909 and has until now been heated with oil. In order for the guests to be able to relax in a pleasant indoor climate, they have converted to renewable energy. With geothermal heat pumps from NIBE, the energy cost has dropped by 75%, which gives a payback period of as short as 5-6 years.

Jarðvarmadælur

NIBE F1345

Tegund: Jarðvarmadæla On/Off stýring tvöföld eining
Notkun: Stór heimili / atvinnuhúsnæði / fjölbýli
Afl: 24 / 30 / 40 / 60 kW (Hægt að tengja margar einingar saman í eitt stærra kerfi.)
Orkunýtni: SCOP ~4.5–5+
Stýring: Takkaskjár – kerfisstýring fyrir stór kerfi – BMS (Modbus 40) sem aukabúnaður
Hitakútur: Ekki innbyggt (þarf ytri tank)
Uppsetning: Modular kerfi (master/slave)
Hljóðstig: Lágt miðað við afl
Hæð: 1800 mm
Breidd: 600 mm
Dýpt: 643 mm
Þyngd: 320 kg

Tegund: Jöfnunartankur (buffer tank) / Safntankur fyrir hitakerfi
Stærðir: 40 / 100 / 200 / 300 / 500 L
Efni: Stáltankur. Góð einangrun. Lítið hitatap.
Upphitun: Engin bein upphitun. Tengist varmadælu eða öðrum hitagjafa
Notkun: Jafnar flæði í hitakerfi. Virkar sem jöfnun milli framleiðslu og dreifingar.
Eiginleikar: Einföld uppsetning. Stöðugur rekstur. Færri start/stop. Betra kerfisstöðugleiki. Minni truflanir milli hringrása

Frostlögur & lagnir

Rör í jörð

Lagnir fyrir jarðvarmadælur PE 40 mm - 100m - 300m - 400m - 500m

TURBULENT FLOWS AT SIGNIFICANTLY LOWER FLOW RATES

Turbulent flow increases the heat transfer to the collector fluid. With the TurboCollector, turbulent flow is induced at 22% lower flow rates than a conventional collector (1,800 Reynolds vs 2,300 for conventional collectors)

UP TO 11% INCREASE IN COP

Simulations show the TurboCollector reduces the convective resistance with up to 80%, increasing the collector fluid temperature and COP of the heat pump

ELECTRICITY SAVINGS, YEAR AFTER YEAR

During 50+ years of collector lifetime, the TurboCollector will continuously reduce electricity consumption, saving money and CO2

CERTIFIED PRODUCTS

The TurboCollector comes with all relevant approvals, depending on your local market (P-marking and SKZ)

AVAILABLE IN ALL RELEVANT DIMENSIONS AND PRESSURE CLASSES

Single or double collectors, 25mm, 32mm, 40mm, 45mm, 50mm and 55mm. Also available in MuoviTech's patent pending elliptical turbo design: MuoviEllipse

MAXIMISES THE HEAT TRANSFER

Muovitech's fins with alternating pattern maximises the heat transfer by initiating turbulent flows at lower flow rates than conventional collectors

MUOVITECH'S PATENTED FIN DESIGN IS OPTIMISED FOR IMPROVING HEAT TRANSFER AND GEOTHERMAL SYSTEM EFFICIENCY

Clockwise and counterclockwise rotation

Independent research shows that MuoviTech's unique and patented fin design with alternating fin directions is creating the most optimal heat transfer.

 

Up to 600% increase in convective heat transfer

There is a negligible pressure drop difference between the TurboCollector and laminar probes for flow rates outside of Reynolds numbers 1800 to 2300.

 

Study made in cooperation with Chalmers University in Sweden

The study concludes that MuoviTech's Turbo Collector creates up to 600% increase in convective heat transfer. TO THE STUDY

PRODUCT INFORMATION FOR TURBOCOLLECTOR®

 

TurboCollector®

Energy collector with better performance.

TurboCollector®
BETTER PERFORMANCE TurboCollector is a patented development of a traditional collector, with significantly better heat transfer characteristics. This is created by a more turbulent flow. Field measurements show that TurboCollector has up to 33% lower bore resistance than equivalent measurements on a smooth collector. PRODUCT INFORMATION Dimensions: 32mm, 40mm, 45mm, 50mm Lengths: 50-500m Pressure classes: PN10 SDR17, PN12.5 SDR13.6 and PN16 SDR11 Material: PE100 och PE100RC Supplied with factory-customised return weight. The return bend is well protected. Length is adapted for optimal transport and easy installation. CERTIFICATE P-mark of RISE with approval number SC1106-11.
Pictures for TurboCollector®

E-therm KBS Agro - 20L brúsi - 206L Tunna - 1000L Bambi

Hitatúpur

NIBE ELK

Tegund: Rafmagnsaukahitari
Notkun: Backup og toppafl í hitakerfum
Stærðir: 7-15 / 26 / 42 kW (fer eftir gerð)
Efni: Stálhús með hitunareiningu